Heerema's crane vessels to switch from diesel generators to wind energy
Substantial improvement of air quality for residents of Rozenburg and Maassluis
Heerema Marine Contractors will provide its crane vessels with clean energy. By switching off the diesel generators, total emissions will be reduced by the equivalent of the annual emissions of approximately 5,000 diesel cars. Eneco will supply power from the wind farm on Landtong Rozenburg. Heerema's crane vessels are often moored in the Calandkanaal in Rotterdam. The use of clean energy reduces noise and air pollution, significantly reduces CO2 emissions and improves the quality of life in Rozenburg and Maassluis.
To supply the power, an "e-house" of 16 by 9 meters will be built on Landtong Rozenburg together with several transformers. Eneco and the Port of Rotterdam Authority have set themselves the goal of providing vessels, in addition to those of Heerema, with shore power at other locations in the vicinity. To get the project off the ground, the Municipality of Rotterdam has reserved a subsidy of €2 million in its 2020 budget, provided that the e-house on Landtong Rozenburg is properly integrated into its surroundings in consultation with local residents.
It is not very common internationally that these types of large vessels are connected to shore power. What makes the project truly unique is the direct supply of wind turbine power to these nearby seagoing vessels. Eneco (80%) and the Port of Rotterdam Authority (20%) are now establishing the "Rotterdam Shore Power B.V." with Heerema as their first customer. In addition to supplying Heerema, this new power company wants to supply shore-based power to several companies in the area. Discussions on this are ongoing. Other nearby terminals can be supplied with shore power from the e-house on Landtong Rozenburg.
5,000 diesel cars
Heerema's Sleipnir and Thialf are the largest crane vessels in the world. These crane vessels are regularly moored in the Calandkanaal in Rotterdam for maintenance or to prepare for projects at sea. Vessels need energy to run on-board facilities. These include pumps, cranes, lighting, air conditioning and other equipment. Vessels usually deploy their diesel generators to generate the necessary power. They make noise and emit particulate matter, nitrogen oxide (NOx), sulfur dioxide (SO2) and CO2, among other things. The diesel generators of Heerema's vessels produce approximately the same amount of these emissions each year as do 5,000 diesel cars. By switching off the generators, emissions of CO2 are reduced by approximately 15,000 metric tons each year.1
With this innovative project, Heerema, Eneco, the Port of Rotterdam Authority, and the Municipality of Rotterdam want to show that it is possible to supply shore-based power to large seagoing vessels. Because of this demonstration aspect, the municipality has reserved a €2 million subsidy for the project in its 2020 budget. This is on condition that the e-house on Landtong Rozenburg, in consultation with local residents, will be well integrated into its surroundings. If the Rotterdam Shore Power B.V. can connect several companies and its income increases as expected, the municipal subsidy will be returned.
Integration into Landtong Rozenburg
The project will apply for the permits in late 2019 and construction is to start in the spring of 2020. Most important is building the e-house of approx. 16 x 9 x 5.5 meters, including several transformers. This e-house will be located near Heerema's berth on the north side of the Noordzeeweg on Landtong Rozenburg. The integration of this e-house into its surroundings is very important and local residents will be invited to express their views on the plans at several meetings in the near future. Heerema's vessels also need to be converted to connect to shore power. If everything goes according to plan, Heerema's vessels will be plugged in sometime next year.
1 The average diesel car emits 150 gram ofCO2 per km and drives 37 km per day.
Sleipnir successfully installs the 12,050 metric ton Johan Sverdrup processing platform (P2) jacket, after earlier completing the inshore integration of the three P2 topside modules on behalf of client Aibel at the GMC yard in Gismarvik in May.
- Read more
Heerema's DCV Balder completes the offshore removal of the Morpeth Tension-leg Platform (TLP) on behalf of client Eni US Operating Company.
- Read more